WORKSHOP DIVISION

TEMMCO Workshop handles medium to heavy engineering including turning, milling, vertical and horizontal boring, CNC turning and milling, fabrication, sub arc and weld reclamation.

Overview of machine shop

Vertical borer to 3100mm diameter









Capabilities

Turning
  • Lathe 230mm Swing x 1.5m between centres
  • Lathe 420mm Swing x 1.7m between centres
  • Lathe 550mm Swing x 4m between centres
  • Lathe 800mm Swing x 5m between centres
  • Lathe 1200mm Swing x 5m between centres
Milling
  • Vertical Mill Axis X1200, Y300, Z400
  • Elga Mills x 2 Axis X4200, Y900, Z1200
Vertical & Horizontal Boring
  • Vertical borer to 3100mm diameter
  • Vertical borer to 1500mm diameter
  • Horizontal Borers x 2
CNC Machining Centres
  • CNC Machining Centre Axis X1250, Y700, Z650
  • CNC Machining Centre Axis X1000, Y525, Z500
  • CNC Machining Centre x 2 Axis X2000, Y890, Z850
  • CNC Bed Mill X4000, Y1000, Z1500
  • CNC Turning 3.1 m between centres x 720 over bed
Drilling Machines
  • Radial Arm Drills x 2
  • Pedestal Drills x 2
Fabrication & Weld Reclamation
  • General Fabrication
  • Special Purpose Automatic Welding
  • Sub Arc Welding
  • MIG/TIG
  • 5 Ton Rotator (Horizontal/Vertical)
  • 10 Ton Horizontal Welding Rotator
  • Automatic Welding Lathe 800mm Swing x 5 metres
Works Facility
  • A factory of 3,000 m². Consisting of four (4) bays with each bay serviced by two (2) overhead travelling cranes.
  • Yard and lay down areas (7,500 m²).